Functional testing for smoke detector is a very important process to ensure the fire alarm system are working at optimal at any given time. As per NFPA 72(10), Sec. 14.4.1.2 regular functional testing is required on a regular basis. Novus Fire and Security LLC offer the following options, that allows testing as per international Standards and Codes, and also developed in conjunction with most detector manufacturers. We offer one of the best products that allow functional testing of smoke detectors, which are accepted and approved by leading detector manufacturers in the UAE and KSA. We offer the following testing options listed below:
Solo 365 Smoke Detector Tester
An innovative new tester for the functional testing of smoke detectors. Solo 365 delivers smoke via Solo ES3 smoke cartridges offering faster, simpler and cleaner testing.
Key features include:
Key features include:
- ‘Auto-start’ – proximity sensor automatically initiates test
- Flexible head – easy testing of hard-to-access detectors
- LED Auto-torch for testing in dark areas
- Clearing mode – for eliminating re-alarms
- Fast detector activation
- Uses non-pressurised, non-hazardous smoke cartridges
- Optional ASD Adaptor allows for testing of ASD systems
- Product code: Solo 365-001
SOLO 365
SOLO Fire Alarm
- SOLO 330
- SOLO AEROSOL
- Solo 461
- Solo 200
- KITS
Solo 330 Aerosol Dispenser
The most widely used detector tester, the Solo 330 works with the Solo A3, Solo A5, Solo A10s and Solo A10 smoke detector test aerosols to deliver fast and effective functional testing of smoke detectors.
Key features include:
Key features include:
- Suits widest range of detectors (up to 100mm / 4” in diameter)
- Dispenser conserves smoke for fast activation & low cost per test
- Spring-loaded solution for suspended ceilings
- Transparent test cup for clear view of detector LED
- Swing frame for use at angles
- Can also be used with Solo C3 Carbon Monoxide Aerosol
- Product code: Solo 330-001
Solo 332 Aerosol Dispenser (Large)
The Solo 332 Aerosol Dispenser is ideal for detectors with a larger diameter thanks to its increased cup size. The controlled delivery of stimuli means detectors can be tested safely with minimum mess.
Key features include:
Key features include:
- Suitable for detectors up to 177mm / 7” in diameter
- Conserves smoke – allowing rapid activation & low cost per test
- Spring-loaded – ideal for suspended ceilings
- Transparent test cup – allows clear view of detector LED
- Swing frame – suits use at angles
- UL & ULC Listed
- Compatible with Solo C3 for CO detector testing
- Product Code: Solo332-001
Solo Smoke Aerosols
Approved all over the world, our Solo smoke aerosols (used with the Solo 330/332 dispensers) deliver smoke particles to the detector under test replicating the conditions of smoke from a fire. Our range of smoke aerosols has recently increased to allow continued use of our Solo 330/332 dispensers in full compliance with latest regulations.
Key features include:
Key features include:
- Detector manufacturer approved
- Designed for use with Solo 330 dispenser
- Compliant with regulations
- UL certified
- Product Code: Solo A10-001 (150ml Can)
- Product Code: Solo A10S-001 (250ml Can)
- Product Code: Solo A5-001
- Product Code: Solo A3-001*
-
*Available while stocks last
Smokesabre – Smoke Aerosol (Hand-Held)
Simple, low cost and even fun. SmokeSabre is a hand-held smoke detector tester that provides a fast and effective method for testing smoke detectors.
Key features include:
Key features include:
- Enables functional testing with ease
- Eliminates the risk of harmful residue
- Cannot be activated unless the Sabre is fully extended
- Enables functional testing of ionisation and optical smoke detectors
- Product Code: SmokeSabre-01-001
Testifire 1001 – Detector Tester
The most popular version of Testifire, the Testifire 1001 allows fast and efficient testing of smoke and heat detectors. These tests can be carried out as single, simultaneous or sequential tests depending on the detector being tested.
Key features include:
Key features include:
- Compatibility with widest range of detectors
- Smoke & heat generated on–demand (only when detector enters cup)
- Transparent test cup for clear view of detector
- Adjustable handle for use at angles
- Testifire 2001 available for CO testing
- Product Code: Testifire 1001-001
Testifire TS3 Smoke Capsule
Smoke generated by Testifire is delivered via capsules. The use of capsules offers a number of benefits over traditional aerosol canisters.
Key features include:
Key features include:
- Non-pressurised – easier to store and transport
- On-demand smoke generation – less wastage, more tests
- Smoke stimulus which is compatible with widest range of detectors
- Product Code: TS3-001
Scorp 1011 – Smoke Detector Tester
The Scorpion head unit is permanently installed alongside the smoke detector.
Key features include:
Key features include:
- Smoke tailored for functional testing of point type smoke detectors
- Adjustable smoke time to suit requirements of system under test
- Clearing function enables rapid reset and reduces repeat alarms
- Scorp 2011 available for testing aspirating smoke detection systems
- Product Code: SCORP 1011-001
Trutest 801 Sensitivity Tester
The Trutest 801 has been designed for engineers to measure the sensitivity of smoke detectors quickly, accurately and with maximum efficiency. The Trutest 801 is ideal for those who already own a Solo access pole.
Product includes:
Product includes:
- Sensitivity tester head unit
- Control panel
- Durable storage case
- Product Code: Trutest 801-001
Trutest 800 – Sensitivity Tester Kit
For those also requiring the Solo access pole, the Trutest 800 provides everything you need – with access up to 6 metres provided with the Solo 100.
Product includes:
Product includes:
- Trutest 801 smoke detector sensitivity tester
- Solo 100 Access Pole
- Storage case and pole bag
- Product Code: Trutest 801-001
